Aluminum Aerosol Can Production Line

Choosing our products is saving money for you. our line is full automatic line. XR01-450 impact extrusion press1.Max tube length: 230mm2.Production diameter: 22mm-55mm3,Production capacity:≤120pcs/min4.Main motor power:30KW5.Dimension:3800X 2500X2100mm6. Net weight:12000kg 2) YR 02 Trimming machine1.main motor

Featured Products

Choosing our products is saving money for you. 
our line is full automatic line. 

XR01-450 impact extrusion press
1.Max tube length: 230mm
2.Production diameter: 22mm-55mm
3,Production capacity:≤120pcs/min
4.Main motor power:30KW
5.Dimension:3800X 2500X2100mm
6. Net weight:12000kg
 
2) YR 02 Trimming machine
1.main motor power:4KW. Dust suction power:4KW. Brush shoulder power:2.2KW
2.production speed:≤120pcs/min.inverter controlled.
3.available tube:22mm-55mm
4.available length:≤230mm
5. Dimension: 2885X 2540X 1820
6.Net weight:3100kg
 
3)XR03 Cleaning machine
 The cans' inside and outside is cleaned by special alkaline cleaner at twice. After three times cleaning, the cans is conveyed to oven by conveyor chain. The main cleaning machine adopts high quality stainless steel raw material, has durable, convenient operation and beautiful shape.
The main parameter:
1) Main power:6.8KW
2) Heating power:93kw
3) Production speed: ≤120pcs/min
4) Available tube:22mm-55mm
5) Available length:≤230mm
6) Tube chain total length:76m, pitch:25.4 X 3
7)  Dimension: 6576X 3554X3750
8)  Net weight:5200kg
 
 4) XR 04 accumulator ONE LINE MATCHES WITH 2-3 SETS OF ACCUMULATOR.
The accumulator is used for timing the oven and the press unit, or the press unit and the capsule and the capping machine. The accumulator is equipped with a loading and unloading system, with either independent or servo controlled drive transmission, for implementation in all lines, existing and new.
Main technical parameter:
1. Available tube:22mm-55mm
2. Available length:≤230mm
3. Main motor power: 3KW
4. Dimension:5100 X 1500 X 4275
5.  Net weight:4000kg
 
  5) YR 05 internal lacquering machine
Main technical parameter
1. Available tube:22mm-55mm
2.Available length:≤230mm
3. Production speed:≤120pcs/min
4. Main motor power: 7KW
5. Input air pressure: P=0.5Mpa
6.Dimension:1920 X 1230 X 2490
7. Net weight:3200kg
 
6)       Tube Lacquer curing oven
1. Available tube:22mm-55mm
2.Available length:≤230mm
3. Production speed:≤120pcs/min
4. Main motor power: 90KW
5. Input air pressure: P=0.5Mpa
6.Dimension:4800 X 3500 X 2500(mm)
7. Net weight:8500kg
 
  7) XR08 Base-Coating machine
   It applies to print the cans' surface with automatic detect system for confirm without tube no printing. the new type robot could guarantee the working steady.PLC controlled.
       1. Available tube:22mm-55mm
       2.Available length:≤230mm
  3. Working speed: ≤120PCS/min
   4. Main power: 3.35KW
5. Input air pressure:P=0.5Mpa
6 Dimension: 2750mm×2330mm×1760mm
7 Net weight:5100KG
 8) XR09 six-color printing machine
 Precise index ensures accuracy of every movement.It is easy to dismount/rectify printing mandrel.
 Tube feeding system works with detector.Coating will not be proceed without tube on mandrel.Machine will stop automatically if tubes are not taken from mandrel to the oven.
 Corona system with precipitator ensures cleaning of tubes before printing.
  Reasonable ink-transmission system shows good effect to large area/screen point printing.
  Foldable ink unit is easy to clean,change color and stick printing plate.
      1. Available tube:22mm-55mm
      2.Available length:≤230mm
  3. Production speed: ≤120PCS/min
  4. Main power:16.07KW
  5. Input air pressure: P=0.5Mpa
  6. Net weight: 6500KG
  7. Dimension: 3340mm×2330mm×3200mm
 
  9)XR08 Vanish machine
       1. Available tube:22mm-55mm
       2.Available length:≤230mm
  3. Working speed: ≤120PCS/min
   4. Main power: 3.35KW
5. Input air pressure:P=0.5Mpa
6 Dimension: 2750mm×2330mm×1760mm
       7 Net weight:5100KG
 
  10) XR 12 fuel gas oven/ platform (output:120pcs/min, drying time :8 min for reference)
       1. Available tube:22mm-55mm
       2.Available length:≤230mm
   3. Main power: 2.25KW
4. Fuel gas consumption: 100,000.00 Cal
5.  Dimension: 3950mm×1100mm×2700mm
 
 11)  Automatic Necking machine
       1. Available tube:22mm-55mm
       2.Available length:≤230mm
  3. Main power: 22KW
       4. Input air pressure:P=0.5Mpa
       5. Dimension: 4000mm×2300mm×1900mm
       6. Net weight:8500kg
Aluminum Aerosol Can Production Line
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours